Table B.3
Clumps properties of the main filaments.
| nc (a) | λcl,obs (b) | Mcl,obs (b) | λcl,IM97 (c) | Mcl,IM97 (d) | λcl,vir (e) | Mcl,vir (f) | |
|---|---|---|---|---|---|---|---|
| Filament | (104 cm−3) | (pc) | (M⊙) | (pc) | (M⊙) | (pc) | (M⊙) |
| Derived from 13CO | |||||||
| F1 | 0.97 | 0.20–1.00 | 5–35 | 0.09–0.27 | 1.8–5.6 | 0.43–1.35 | 20–70 |
| F2 | 1.13 | 0.20–2.00 | 10–25 | 0.08–0.25 | 1.9–5.9 | 0.38–1.21 | 20–60 |
| F3 | 0.95 | 0.10–1.00 | 10–15 | 0.08–0.26 | 1.6–5.2 | 0.49–1.56 | 35–110 |
| F4 | 1.00 | 0.20–0.70 | 7–10 | 0.08–0.25 | 1.6–5.0 | 0.35–1.13 | 15–45 |
| F5 (*) | 1.23 | … | … | 0.07–0.24 | 1.7–5.3 | 0.26–0.85 | 8–22 |
| F6 | 2.19 | > 1.00 | 12–17 | 0.05–0.18 | 1.2–3.9 | 0.26–0.85 | 12–40 |
| F7 | 1.36 | 0.25–1.00 | 8–25 | 0.07–0.21 | 1.3–4.3 | 0.38–1.20 | 22–70 |
| F8 | 0.80 | 0.25–1.00 | 8–11 | 0.09–0.28 | 1.7–5.5 | 0.32–1.00 | 11–35 |
| F9 (*) | 0.96 | … | … | 0.08–0.26 | 1.7–5.5 | 0.44–1.40 | 25–80 |
| Derived from C18O | |||||||
| F1 | 1.31 | 0.20–1.00 | 10–30 | 0.07–0.22 | 1.5–4.8 | 0.30–1.00 | 12–38 |
| F2 | 1.55 | 0.20–2.00 | 15–30 | 0.06–0.22 | 1.6–5.0 | 0.26–0.85 | 10–28 |
| F3 | 1.46 | 0.10–1.00 | 15–35 | 0.07–0.21 | 1.3–4.2 | 0.29–0.90 | 10–33 |
| F4 | 1.73 | 0.20–0.70 | 10–20 | 0.06–0.19 | 1.2–3.8 | 0.19–0.63 | 5–13 |
| F5 (*) | 1.38 | … | … | 0.07–0.22 | 1.6–5.0 | 0.42–1.33 | 30–100 |
| F6 | 2.10 | > 1.00 | 10–15 | 0.06–0.18 | 1.3–3.8 | 0.34–1.10 | 25–80 |
| F7 | 1.81 | 0.25–1.00 | 12–35 | 0.06–0.18 | 1.2–3.7 | 0.46–1.50 | 55–100 |
| F8 | 1.27 | 0.25–1.00 | 15–20 | 0.07–0.22 | 1.4–4.3 | 0.40–1.30 | 18–100 |
| F9 (*) | 1.16 | … | … | 0.07–0.25 | 1.6–5.0 | 0.45–1.45 | 23–35 |
| Derived from the H2 Herschel-derived column density maps | |||||||
| F1 | 1.34 | 0.20–1.00 | 10–40 | 0.07–0.23 | 1.5–4.8 | … | … |
| F2 | 1.19 | 0.20–2.00 | 10–40 | 0.08–0.25 | 1.8–5.8 | … | … |
| F3 | 1.18 | 0.10–1.00 | 10–25 | 0.07–0.23 | 1.5–4.6 | … | … |
| F4 | 1.66 | 0.20–0.70 | 7–17 | 0.06–0.19 | 1.3–4.0 | … | … |
| F5 (*) | 0.97 | … | … | 0.09–0.27 | 1.9–4.5 | … | … |
| F6 | 1.61 | > 1.00 | 7–12 | 0.07–0.21 | 1.5–4.0 | … | … |
| F7 | 1.46 | 0.25–1.00 | 10–30 | 0.07–0.21 | 1.3–5.4 | … | … |
| F8 | 0.78 | 0.25–1.00 | 10–17 | 0.09–0.29 | 1.8–3.2 | … | … |
| F9 (*) | 1.03 | … | … | 0.08–0.25 | 1.7–2.3 | … | … |
Notes. (a) The density, nc, was estimated considering that the filaments are homogeneous cylinder. (b) Minimum (left) and maximum (right) values of the masses and distances between clumps. These values were measured from the 13CO, C18O and H2 maps. For this, we set a polygon around the clumps and protostar presented in Fig 4. (c) Calculated from the equation 
.
(d) Calculated from the equation Mcl,O64 = 0.877 M⊙
.
(e) Calculated from the equation 
.
(f) Calculated from the equation Mcl,IM97 = 575.3 M⊙ 
. The values at the right of the Cols. 5–8 were calculated using the nc listed in Col. 2. The values at the left of the Cols. 5–8 were calculated using the nc as an order of magnitude larger that the values listed in Col. 2. (*)The filaments that are not associated with any clump or protostar (see Fig. 4) were flagged with the “…” mark.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.