Notes. Catalog entries are as follows: (1) core running number; (2) core name = HGBS_J prefix directly followed by a tag created from the J2000 sexagesimal coordinates; (3) and (4): right ascension and declination of core center; (5), (15), (25), (35), and (45): detection significance from monochromatic single scales, in the 70, 160, 250, 350, and 500 μm maps, respectively (NB: the detection significance has the special value of 0.0 when the core is not visible in clean single scales); (6)±(7), (16)±(17) (26)±(27) (36)±(37) (46)±(47): peak flux density and its error in Jy/beam as estimated by getsources; (8), (18), (28), (38), (48): contrast over the local background, defined as the ratio of the background-subtracted peak intensity to the local background intensity (/S_bg); (9), (19), (29), (39): peak flux density measured after smoothing to a 36.3″ beam; (10)±(11), (20)±(21), (30)±(31), (40)±(41), (49)±(50): integrated flux density and its error in Jy as estimated by getsources; (12)–(13), (22)–(23), (32)–(33), (42)–(43), (51)–(52): major & minor FWHM diameters of the core (in arcsec), respectively, as estimated by getsources. (NB: the special value of −1 means that no size measurement was possible); (14), (24), (34), (44), (53): position angle of the core major axis, measured east of north, in degrees; (54) detection significance in the high-resolution column density image; (55) peak H₂ column density in units of 10²¹ cm^-2 as estimated by getsources in the high-resolution column density image; (56) column density contrast over the local background, as estimated by getsources in the high-resolution column density image; (57) peak column density measured in a 36.3″ beam; (58) local background H₂ column density as estimated by getsources in the high-resolution column density image; (59)–(60)–(61): major & minor FWHM diameters of the core, and position angle of the major axis, respectively, as measured in the high-resolution column density image; (62) number of Herschel bands in which the core is significant (Sig_λ> 5) and has a positive flux density, excluding the column density plane; (63) “CSAR” flag: 2 if the getsources core has a counterpart detected by the CSAR source-finding algorithm (Kirk et al. 2013b) within 6″ of its peak position, 1 if no close CSAR counterpart exists but the peak position of a CSAR source lies within the FWHM contour of the getsources core in the high-resolution column density map, 0 otherwise; (64) core type: starless, prestellar, or protostellar; (65) closest counterpart found in SIMBAD, if any, up to 6″ from the Herschel peak position; (66) closest Spitzer-identified YSO from the c2d survey (Dunham et al. 2013, Allen et al., in prep.) within 6″ of the Herschel peak position, if any. When present, the Spitzer source name has the form of SSTc2d JHHMMSSs±DDMMSS (Dunham et al. 2013); (67) comments.