Table E.3.
Isochronal deviation scores for all tested clusters and passband combinations, with all but one parameter set to zero, respectively. The values were rounded to the third decimal point. The bottom section lists the averaged isochronal deviation scores over all three clusters. Values exceeding the defined reliability thresholds are indicated in bold.
Δiso, avg (mag) | ||||
---|---|---|---|---|
Parameter | Value | GBP − GRP | GBP − G | G − GRP |
delta Sco | ||||
Δm | 0.01 | -0.001 | -0.001 | 0.000 |
0.03 | 0.001 | -0.002 | -0.001 | |
fΔϖ | 0.05 | 0.002 | 0.002 | 0.002 |
0.1 | 0.031 | 0.020 | 0.001 | |
fbin | 0.3 | 0.025 | 0.035 | 0.028 |
0.5 | 0.170 | 0.089 | 0.053 | |
AG | 0.25 | 0.032 | 0.022 | 0.027 |
0.75 | 0.116 | 0.087 | 0.106 | |
ffield | 0.25 | 0.020 | 0.023 | 0.021 |
0.5 | 0.056 | 0.054 | 0.034 | |
Blanco 1 | ||||
Δm | 0.01 | -0.001 | -0.001 | 0.000 |
0.03 | 0.000 | -0.003 | -0.003 | |
fΔϖ | 0.05 | 0.003 | 0.000 | -0.003 |
0.1 | 0.018 | 0.010 | 0.004 | |
fbin | 0.3 | 0.024 | 0.023 | 0.025 |
0.5 | 0.125 | 0.072 | 0.049 | |
AG | 0.25 | 0.039 | 0.019 | 0.027 |
0.75 | 0.142 | 0.083 | 0.106 | |
ffield | 0.25 | 0.015 | 0.017 | 0.003 |
0.5 | 0.022 | 0.020 | 0.006 | |
NGC 752 | ||||
Δm | 0.01 | -0.001 | -0.001 | -0.001 |
0.03 | -0.003 | -0.003 | -0.002 | |
fΔϖ | 0.05 | 0.001 | -0.002 | -0.002 |
0.1 | 0.014 | 0.001 | 0.003 | |
fbin | 0.3 | 0.037 | 0.022 | 0.015 |
0.5 | 0.091 | 0.040 | 0.042 | |
AG | 0.25 | 0.075 | 0.032 | 0.044 |
0.75 | 0.252 | 0.124 | 0.160 | |
ffield | 0.25 | 0.001 | 0.004 | 0.001 |
0.5 | 0.002 | 0.001 | 0.002 | |
Average | ||||
Δm | 0.01 | -0.001 | -0.001 | 0.000 |
0.03 | -0.001 | -0.003 | -0.002 | |
fΔϖ | 0.05 | 0.002 | 0.000 | -0.001 |
0.1 | 0.021 | 0.010 | 0.003 | |
fbin | 0.3 | 0.028 | 0.027 | 0.022 |
0.5 | 0.129 | 0.067 | 0.048 | |
AG | 0.25 | 0.049 | 0.024 | 0.033 |
0.75 | 0.170 | 0.098 | 0.124 | |
ffield | 0.25 | 0.012 | 0.015 | 0.008 |
0.5 | 0.027 | 0.025 | 0.014 |
Notes. The results listed here correspond to the values of a single evaluation of the entire parameter grid. Due to the resampling strategy of our extraction method, small changes in the values may occur between runs, but they were found to be on the order of mmag.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.