Table C.1.
All fits carried out for each model assuming GR.
Model | Npar | χ2 | Rχ2 | ΔAIC | ΔBIC | ||
---|---|---|---|---|---|---|---|
PL2/Kepl1 | 30 | ||||||
mean | 15531.9 | 1.24814 | 15591.9 | 15814.8 | |||
max | 8.09 | 0.00065 | 8.09 | 8.09 | |||
refit max | 4.64 | 0.000373 | 4.64 | 4.64 | |||
refit mean | -0.915 | -7.35e-05 | -0.915 | -0.915 | |||
PL3 | 31 | ||||||
mean | 15543.4 | 1.24917 | 15605.4 | 15835.8 | |||
max | 7.93 | 0.000637 | 7.93 | 7.93 | |||
refit max | -31.5 | -0.00253 | -31.5 | -31.5 | |||
refit mean | -30.7 | -0.00247 | -30.7 | -30.7 | |||
PL3DM10 | 39 | ||||||
mean | 15496.8 | 1.24622 | 15574.8 | 15864.6 | |||
max | -0.509 | -4.09e-05 | -0.509 | -0.509 | |||
refit max | -1.87 | -0.000151 | -1.87 | -1.87 | |||
refit mean | -2.22 | -0.000179 | -2.22 | -2.22 | |||
PL4 | 32 | ||||||
mean | 15569.8 | 1.25139 | 15633.8 | 15871.6 | |||
max | 7.56 | 0.000608 | 7.56 | 7.56 | |||
refit max | -50.3 | -0.00404 | -50.3 | -50.3 | |||
refit mean | -53.2 | -0.00427 | -53.2 | -53.2 | |||
PL4 bis | 32 | ||||||
mean | 15558.3 | 1.25047 | 15622.3 | 15860.1 | |||
max | 9.62 | 0.000773 | 9.62 | 9.62 | |||
refit mean | -38.2 | -0.00307 | -38.2 | -38.2 | |||
refit max | -36 | -0.00289 | -36 | -36 | |||
PL5 | 33 | ||||||
mean | 15535.8 | 1.24876 | 15601.8 | 15847.1 | |||
max | 4.82 | 0.000388 | 4.82 | 4.82 | |||
refit max | -24.2 | -0.00195 | -24.2 | -24.2 | |||
refit mean | -29.3 | -0.00236 | -29.3 | -29.3 | |||
planet | 32 | ||||||
max | 15520.9 | 1.24746 | 15584.9 | 15822.7 | |||
mean | 520 | 0.0418 | 520 | 520 | |||
refit mean | -1.76 | -0.000141 | -1.76 | -1.76 | |||
refit max | -6.56 | -0.000527 | -6.56 | -6.56 |
Notes. The reduced χ2, Rχ2, is equal to χ2/Ndof where Ndof = 13534 − Npar. AIC and BIC are the Akaike and Bayesian information criteria, respectively. For each model the first line is the reference fit subtracted from all the other lines. The last line is the best fit of each given model that appears in Table 2 (except for ‘PL4 bis’). The label ‘mean’ indicates that it is the mean of the MCMC sample, ‘max’ shows that it is the element in the sample with the highest likelihood, and ‘refit’ means that a local fit using the Minuit library (see sec.4.1) from either the ‘mean’ or ‘max’ solution has been performed. For model ‘PL4’, ‘bis’ refers to a separate MCMC run (see text).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.