Table 1.
Atomic line parameters from the 4015–4017 Å range.
No | Element | λ0 [Å] | Ei [eV] | geff | A | b [%] | Dcore | log(gf)0 | log(gf)mode2 | log(gf)mode3 | log(gf)spat |
---|---|---|---|---|---|---|---|---|---|---|---|
1 | Fe I | 4015.139 | 4.1631 | 0.666 | 7.44 (b) | 3.9 | 0.149 | −2.172 | −2.087 | −2.170 | −2.166 |
2 | Co I | 4015.219 | 2.7849 | 0.484 | 4.92 (a) | 32.9 | 0.033 | −1.806 | −1.646 | −1.795 | −1.610 |
3 | Ti I | 4015.373 | 2.0850 | 0.515 | 4.99 (a) | 18.5 | 0.428 | −0.084 | −0.217 | −0.069 | −0.105 |
4 | V I | 4015.398 | 2.0618 | 0.995 | 4.00 (a) | 98.3 | 0.007 | −0.857 | −0.859 | −0.799 | −0.221 |
5 | Fe I | 4015.465 | 4.0434 | 1.407 | 7.44 (b) | 33.3 | 0.610 | −0.781 | −0.775 | −0.770 | −0.787 |
6 | Ni II | 4015.474 | 3.9028 | 0.619 | 6.25 (a) | 99.0 | 0.033 | −2.419 | −2.154 | −2.529 | −2.429 |
7 | Nd II | 4015.545 | 1.6766 | 0.886 | 1.50 (c) | 93.9 | 0.026 | 0.080 | 0.365 | 0.118 | 0.589 |
8 | Fe I | 4015.605 | 4.0434 | 1.394 | 7.44 (b) | 4.9 | 0.849 | −0.515 | −0.429 | −0.513 | −0.542 |
9 | Ce II | 4015.875 | 1.0083 | 0.881 | 1.55 (c) | 18.9 | 0.079 | −0.087 | 0.078 | −0.076 | 0.018 |
10 | Fe I | 4015.986 | 4.1235 | 2.000 | 7.44 (b) | 2.4 | 0.248 | −1.928 | −1.781 | −1.925 | −1.922 |
11 | Ni I | 4016.068 | 3.9735 | 1.388 | 6.25 (a) | 13.3 | 0.064 | −1.870 | −1.724 | −1.876 | −1.760 |
12 | Ti I | 4016.274 | 2.0658 | 1.762 | 4.99 (a) | 3.6 | 0.140 | −0.714 | −0.802 | −0.691 | −0.733 |
13 | Fe I | 4016.419 | 3.1775 | 0.682 | 7.44 (b) | 1.0 | 0.865 | −1.600 | −1.633 | ||
14 | Fe I | 4016.541 | 2.6399 | 1.197 | 7.44 (b) | 3.7 | 0.213 | −3.513 | −3.414 | −3.505 | −3.498 |
15 | Mn I | 4016.658 | 4.1926 | 0.035 | 5.39 (a) | 40.4 | 0.012 | −1.160 | −1.348 | −1.192 | −0.876 |
16 | Co II | 4016.685 | 3.0177 | 1.293 | 4.92 (a) | 28.3 | 0.018 | −2.905 | −2.835 | −2.851 | −3.197 |
17 | Fe I | 4016.792 | 4.1195 | 2.002 | 7.44 (b) | 63.2 | 0.057 | −2.576 | −2.723 | −2.574 | −2.357 |
18 | Co I | 4016.793 | 3.5124 | 1.213 | 4.92 (a) | 38.2 | 0.100 | −0.547 | −0.459 | −0.545 | −0.792 |
Notes. The columns represent line number in the spectral region used for analysis (see Fig. 9), chemical element, central wavelength λ0, the energy of lower level Ei, effective Landé factor geff, element abundance A, blending factor b, line core depth Dcore, log(gf)0 parameter and inferred log(gf) in mode 2 averaged over all pixels (log(gf)mode2), mode 3 (log(gf)mode3) and using the spatially average method (log(gf)spat). All atomic data are from Kurucz’s database, except for the Landé factor and abundances. The effective Landé factors are taken from the VALD database, except for line 10, which is computed assuming LS coupling.
References.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.