Notes. Column 1: Name. Column 2: type (from Table 1 in G20). Nomenclature follows that used by the VSX (Watson et al. 2006) described in https://www.aavso.org/vsx/index.php?view=about.vartypes. Column 3: period (from G20). Column 4: distance (from G20). Column 5: error on distance (from G20). Column 6: luminosity (from G20). Column 7: error on Luminosity (from G20). The error is the fit error, and does not include the error on the distance. If the total error on L is desired it can be calculated from with Δ = L ⋅ ((1 + σ_d/d)² − 1). The total error is plotted in Fig. 5. Column 8: number of available spectra, N_spec. Column 9: average of available log g_F values. Column 10: estimated error on the average log g_F value. This includes the error on T_eff (when not given in the reference a conservative value of 100 K has been used) and the error on log g (assumed to be 0.15 dex, unless given specifically), divided by . Column 11: difference between highest and lowest log g_F value. Column 12: references for log g and T_eff values to calculate log g_F and error. The full table is available at the CDS. References. (1) Luck (2018), (2) Andrievsky et al. (1994), (3) Boyarchuk & Lyubimkov (1981), (4) Luck et al. (2003), (5) Schmidt et al. (2011), (6) Andrievsky et al. (2002a), (7) Lemasle et al. (2008), (8) Andrievsky et al. (2013), (9) Kovtyukh et al. (2005), (10) Luck et al. (2006), (11) Yong et al. (2006), (12) Lemasle et al. (2015), (13) Romaniello et al. (2008), (14) Andrievsky et al. (2004), (15) Lemasle et al. (2007), (16) Andrievsky et al. (2002b), (17) Genovali et al. (2014), (18) Anders et al. (2019), (19) Martin et al. (2015), (20) Andrievsky et al. (2016), (21) Inno et al. (2019). Numbers in parentheses indicate references not considered.