Table C.1
Values of the SEDs best fit.
Name | Type | αthin | χ2 | |||||
|
||||||||
0925+3159 |
![]() |
–0.9 | 8.0 | |||||
0958+3224 |
![]() |
–0.5 | 1170.0 | |||||
|
||||||||
1015+0318 |
![]() |
–0.5 | –1.0 | 4.2 | 0.290 | 1.4 | ||
1213+1307 |
![]() |
–0.4 | –0.9 | 12.8 | 0.580 | 0.1 | ||
1647+3752 |
![]() |
–0.4 | –1.0 | 4.5 | 0.466 | 3.0 | ||
1713+2813 |
![]() |
–0.4 | –1.3 | 1.7 | 1.370 | 0.02 | ||
2200+0708 |
![]() |
–0.0 | –1.0 | 0.2 | 6.263 | 29.0 | ||
|
||||||||
Name | Type | αthin | ν | S ν | χ 2 | |||
|
||||||||
1723+3417 |
![]() |
–0.9 | 2.0 | 0.550 | 0.6 | |||
2050+0407 |
![]() |
–0.1 | 1.1 | 0.700 | 5.0 | |||
2245+0324 |
![]() |
–0.4 | 2.5 | 0.580 | 0.5 | |||
|
||||||||
Name | Type | αthin | αbreak | ν | S nu | ν break | χ 2 | |
|
||||||||
0751+2716 |
![]() |
–0.0 | –1.1 | 0.2 | 1.650 | 0.6 | 0.2 | |
1311+1417 |
![]() |
–0.1 | –1.2 | 1.2 | 0.773 | 4.0 | 0.02 | |
1435–0414 |
![]() |
–0.3 | –1.0 | 0.1 | 1.071 | 6.2 | 0.003 | |
|
||||||||
Name | Type | ν1 | S 1 | ν2 | S 2 | χ 2 | ||
|
||||||||
1351+0830 |
![]() |
1.4 | 0.340 | 9.3 | 0.210 | 0.2 | ||
1549+5038 |
![]() |
0.7 | 0.908 | 7.6 | 0.700 | 8.1 | ||
1616+2647 |
![]() |
0.1 | 1.320 | 0.6 | 1.620 | 5.1 | ||
2101+0341 |
![]() |
1.9 | 0.720 | 9.9 | 0.700 | 5.0 | ||
|
||||||||
Name | Type | ν1 | S 1 | ν2 | S 2 | ν3 | S 3 | χ 2 |
|
||||||||
0239–0234 |
![]() |
0.5 | 0.300 | 3.9 | 0.500 | 11.6 | 0.380 | 0.01 |
0742+4900 |
![]() |
0.6 | 0.200 | 2.7 | 0.400 | 13.8 | 0.241 | 0.2 |
1043+2408 |
![]() |
0.4 | 0.470 | 4.4 | 0.710 | 15.7 | 0.730 | 0.6 |
1044+0655 |
![]() |
0.1 | 1.600 | 3.2 | 0.190 | 12.7 | 0.130 | 1.2 |
1048+0141 |
![]() |
0.1 | 1.130 | 2.7 | 0.320 | 10.0 | 0.110 | 0.1 |
1146+5356 |
![]() |
0.2 | 0.400 | 2.9 | 0.470 | 10.0 | 0.350 | 1.2 |
1246–0730 |
![]() |
0.1 | 1.740 | 4.4 | 0.660 | 15.0 | 0.600 | 63.0 |
2147+0929 |
![]() |
0.1 | 2.310 | 2.6 | 0.360 | 10.7 | 0.500 | 2.3 |
|
||||||||
Name | Type | α thin | ν2 | S 2 | χ 2 | |||
|
||||||||
1312+5548 |
![]() |
–0.7 | 0.7 | 0.750 | 0.3 | |||
|
||||||||
Name | Type | ν2 | S 2 | ν3 | S 3 | χ 2 | ||
|
||||||||
0243–0550 |
![]() |
1.2 | 0.480 | 6.6 | 0.450 | 0.1 | ||
0845+0439 |
![]() |
2.5 | 0.470 | 13.6 | 0.520 | 2.2 | ||
1405+0415 |
![]() |
1.0 | 0.770 | 8.2 | 0.500 | 25.0 | ||
1616+0459 |
![]() |
3.3 | 0.610 | 8.0 | 0.720 | 0.2 |
Notes. Columns: name of the source, the best fit model, αthin (for the steep spectrum and also for the various syncrotron components), peak flux density (Smax), the peak frequency (νmax), and the χ2. The flux density S is in Jy and the frequency ν is in GHz. Explanation on the abbreviation I use in the best-fit column: is linear fit;
is linear fit with a break;
is one synchrotron component;
is one synchrotron component with a break;
is two or more synchrotron components;
is linear fit at low frequency plus one or two synchrotron components at higher frequency.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.