Free Access
Status and/or determination error | Reference | |
Beams and far side lobes | computed from front horns and telescope measurements | Maffei et al. (2010), Tauber et al. (2010b) |
Spectral bands | 0.1 cm-1
resolution, ![]() ![]() |
Ade et al. (2010) |
final determination within requirement | ||
Polarisation orientation | 0.3![]() ![]() ![]() |
Rosset et al. (2010) |
Cross-polarisation leakage | 0.1%/0.2%/2.2% (min/avg/max) for PSB | |
final determination requires sky data | ||
4 K stage emissivity | better than 1% | Sect. 5.1.5 |
1.6 K stage emissivity | better than 3% for ![]() |
Sect. 5.1.5 |
within requirements to allow correction of remaining | ||
systematics coming from thermal stability below | ||
Thermal stability | determined within range [1 mHz, 100 Hz] | Sect. 5.3.2 |
flight data required for the final stability determination | ||
Linearity | 0.1% determination within requirements | Sect. 5.2.1 |
Time response | measured to better than 0.1% for 20 detectors | Sect. 5.2.2 |
sky data expected for the complete set of detectors | ||
Response | 3% determination error | Sects. 5.1.3, 5.2.1 |
sky data required to provide the absolute calibration | ||
Total detector noise | explored within range [1 mHz, 100 Hz] | Sect. 5.2.5, Lamarre et al. (2010) |
Compatibility | checked to 1% to 3% of noise level | Sect. 4.2 |
flight data required to provide the ultimate values, | ||
including particle hits rate | ||
Optical crosstalk | down to 60 dB | Sect. 5.1.6 |
Electrical crosstalk | down to 80 dB | Sect. 5.2.4 |
determination within requirement, sky data to reach goal of 80 dB |
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.