Table 6
SED parameters and physical properties of the sources.
| Source |  |
 |
λpeak [µm] | Tdust [K] | M [M⊙] | Lbol [L⊙] | N(H2) [1023 cm−2] | n(H2) [103 cm−3] | l [pc] | Rfil [pc] |
|---|---|---|---|---|---|---|---|---|---|---|
| G1.75-0.08 | ||||||||||
| Filament | 4 | 4.49 | 200.0 | 15.0 ± 0.4 | 8 289 ± 1196 |  |
0.3 ± 0.05 | 9.3 ± 1.3 | 8.2 ± 0.2 | 0.70 ± 0.01 |
| Clump A | 4 | 3.55 | 214.3 | 14.3 ± 0.4 | 5 501 ± 935 |  |
1.7 ± 0.6 | 6.1 ± 1.0 | … | … |
| Clump B | 4 | 3.30 | 200.0 | 14.5 ± 0.5 | 3 770 ± 738 |  |
1.7 ± 0.6 | 6.8 ± 1.3 | … | … |
| G11.36+0.80 | ||||||||||
| Filament | 4 | 2.31 | 200.0 | 15.2 ± 0.5 | 1 468 ± 199 |  |
0.2 ± 0.03 | 11.5 ± 1.6 | 3.9 ± 0.3 | 0.39 ± 0.03 |
| Clump A | 5 | 0.90 | 214.3 | 13.6 ± 0.1 | 532 ± 56 |  |
1.3 ± 0.4 | 8.9 ± 0.9 | … | … |
| Clump B | 5 | 2.60 | 230.8 | 13.2 ± 0.2 | 437 ± 66 |  |
2.3 ± 0.9 | 12.0 ± 1.8 | … | … |
| Clump C(a) | 6 | 1.41 | 230.8 | 12.8 ± 0.3 | 633 ± 112 |  |
2.6 ± 1.0 | 13.0 ± 2.3 | … | … |
| … | … | … | 46.5 ± 0.1 | 0.19 ± 0.01 | … | … | … | … | … | |
| Clump D(a) | 6 | 1.87 | 200.0 | 14.8 ± 0.6 | 232 ± 56 |  |
1.8 ± 0.8 | 11.5 ± 2.8 | … | … |
| … | … | … | 43.1 ± 0.3 | 0.17 ± 0.01 | … | … | … | … | … | |
Notes. The parameters given in the table are the number of flux density data points used in the SED fit, reduced χ2 value, wavelength of the peak position of the fitted SED, dust temperature, total (gas+dust) mass, bolometric luminosity, H2 column density (source-averaged value within the LABOCA 3σ emission for the filaments, and for the clumps in their ArTéMiS 350 µm peak position), volume-averaged H2 number density, projected length of the filament, and the outer radius of the filament (see Sect. 3.4). (a)The SED of the source was fitted with a two-temperature MBB model. The temperature and mass of the warm component are shown below the cold dust component values.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.