All Figures

$\begin{figure} \par\includegraphics[width=8.8cm,clip]{3360fig1.eps} \end{figure}$ Figure 1: L $\beta$ profiles for the 5-level model ( left-hand side) and for the 12-level model ( right-hand side). Full lines represent averages over y, dashed lines are mean profiles over x.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.8cm,clip]{3360fig2.eps} \end{figure}$ Figure 2: L $\delta$ profiles for the 5-level model ( left-hand side) and for the 12-level model ( right-hand side). Full lines represent averages over y, dashed lines are mean profiles over x.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.8cm,clip]{3360fig3.eps} \end{figure}$ Figure 3: The profiles of lines L $\beta$ , L $\gamma$ and L6. Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=16cm,clip]{3360fig4.eps} \end{figure}$ Figure 4: The intensity plots for the lines of L $\beta$ ( pair of plots at the top), L $\gamma$ ( middle plots) and L6 ( pair of plots at the bottom). On the left-hand side the structure is shown from the front, on the right-hand side from the rear.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.7cm,clip]{3360fig5.eps} \end{figure}$ Figure 5: Profiles of L $\alpha$ and L $\beta$ for model A₁ ( left-hand side) and C₁ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fig6.eps} \end{figure}$ Figure 6: Profiles of L $\gamma$ for model A₁ ( left-hand side) and C₁ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fig7.eps} \end{figure}$ Figure 7: Profiles of L7 for model A₁ ( left-hand side) and C₁ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=15.3cm,clip]{3360fig8.eps} \end{figure}$ Figure 8: L $\beta$ contributions as functions of x and y. The first six panels are for model A₁, the other six for model C₁. On the left-hand side the viewing is in the direction along the x-axis ( from the left side), on the right-hand side in the y-direction ( from the bottom). The upper pairs of each model are for the central frequency, the middle pairs are for the peak frequency and the lower ones represent contributions in the line wings. x-y dimensions are in cm.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=16cm,clip]{3360fig9.eps} \end{figure}$ Figure 9: L9 contributions as functions of x and y. The first six panels are for model A₁, the other six for model C₁. The figure is arranged in the same way as Fig. 8.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=15.94cm,clip]{3360fg10.eps}\end{figure}$ Figure 10: Depth-variations of the line-center contribution function for the Lyman series (L $\alpha$ to L10), as viewed along the field lines. The model A₁ was used.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fg11.eps} \end{figure}$ Figure 11: Profiles of L $\alpha$ for model B₁ ( left-hand side) and C₁ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fg12.eps} \end{figure}$ Figure 12: L $\alpha$ contribution functions for model B₁ ( top) and C₁ ( bottom), showing the contributions for the peak frequency for observation in y-direction.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fg13.eps} \end{figure}$ Figure 13: Profiles of L $\beta$ for model B₁ ( left-hand side) and C₁ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.8cm,clip]{3360fg14.eps} \end{figure}$ Figure 14: L $\beta$ contribution functions for model B₁ ( top) and C₁ ( bottom), showing the contributions for the peak frequency for observation in y-direction.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fg15.eps} \end{figure}$ Figure 15: Profiles of L $\alpha$ for models A₃ ( left-hand side) and A $_{3\_1}$ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fg16.eps} \end{figure}$ Figure 16: L $\alpha$ contribution functions for model A₃ ( top) and A $_{3\_1}$ ( bottom), showing the contributions for the peak frequency for observation in y-direction.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=7.1cm,clip]{3360fg17.eps} \end{figure}$ Figure 17: The geometrical shape of all models. Each bar has a width of 1000 km.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=8.8cm,clip]{3360fig1.eps} \end{figure}$	Figure 1: L $\beta$ profiles for the 5-level model ( left-hand side) and for the 12-level model ( right-hand side). Full lines represent averages over y, dashed lines are mean profiles over x.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.8cm,clip]{3360fig2.eps} \end{figure}$	Figure 2: L $\delta$ profiles for the 5-level model ( left-hand side) and for the 12-level model ( right-hand side). Full lines represent averages over y, dashed lines are mean profiles over x.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.8cm,clip]{3360fig3.eps} \end{figure}$	Figure 3: The profiles of lines L $\beta$ , L $\gamma$ and L6. Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=16cm,clip]{3360fig4.eps} \end{figure}$	Figure 4: The intensity plots for the lines of L $\beta$ ( pair of plots at the top), L $\gamma$ ( middle plots) and L6 ( pair of plots at the bottom). On the left-hand side the structure is shown from the front, on the right-hand side from the rear.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.7cm,clip]{3360fig5.eps} \end{figure}$	Figure 5: Profiles of L $\alpha$ and L $\beta$ for model A₁ ( left-hand side) and C₁ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fig6.eps} \end{figure}$	Figure 6: Profiles of L $\gamma$ for model A₁ ( left-hand side) and C₁ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fig7.eps} \end{figure}$	Figure 7: Profiles of L7 for model A₁ ( left-hand side) and C₁ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=16cm,clip]{3360fig9.eps} \end{figure}$	Figure 9: L9 contributions as functions of x and y. The first six panels are for model A₁, the other six for model C₁. The figure is arranged in the same way as Fig. 8.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=15.94cm,clip]{3360fg10.eps}\end{figure}$	Figure 10: Depth-variations of the line-center contribution function for the Lyman series (L $\alpha$ to L10), as viewed along the field lines. The model A₁ was used.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fg11.eps} \end{figure}$	Figure 11: Profiles of L $\alpha$ for model B₁ ( left-hand side) and C₁ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fg12.eps} \end{figure}$	Figure 12: L $\alpha$ contribution functions for model B₁ ( top) and C₁ ( bottom), showing the contributions for the peak frequency for observation in y-direction.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fg13.eps} \end{figure}$	Figure 13: Profiles of L $\beta$ for model B₁ ( left-hand side) and C₁ ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.8cm,clip]{3360fg14.eps} \end{figure}$	Figure 14: L $\beta$ contribution functions for model B₁ ( top) and C₁ ( bottom), showing the contributions for the peak frequency for observation in y-direction.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fg15.eps} \end{figure}$	Figure 15: Profiles of L $\alpha$ for models A₃ ( left-hand side) and *A $_{3\_1}$* ( right-hand side). Full lines are y-mean profiles, dashed lines are x-mean profiles.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=8.6cm,clip]{3360fg16.eps} \end{figure}$	Figure 16: L $\alpha$ contribution functions for model A₃ ( top) and *A $_{3\_1}$* ( bottom), showing the contributions for the peak frequency for observation in y-direction.
Open with DEXTER

$\begin{figure} \par\includegraphics[width=7.1cm,clip]{3360fg17.eps} \end{figure}$	Figure 17: The geometrical shape of all models. Each bar has a width of 1000 km.
Open with DEXTER