Table 3.
Parameters derived from the PL and 2T fits shown in Fig. 9.
| Region | Fit | χ2/d.o.f. | β | Tw | log(NHw) | Mw | Th | log(NHh) | Mh |
|---|---|---|---|---|---|---|---|---|---|
| name | model | (°K) | (cm−2) | 105 M⊙ | (°K) | (cm−2) | 105 M⊙ | ||
| R1 | PL | 1.28 | 5.03 | – | 20.1 | 0.55 | – | – | – |
| 2T | 1.84 | – | 271 ± 54 | 20.1 | 0.50 | 770 ± 171 | 18.5 | 0.01 | |
| R2 | PL | 0.36 | 5.23 | – | 20.4 | 1.05 | – | – | – |
| 2T | 0.24 | – | 266 ± 16 | 20.4 | 1.0 | 760 ± 46 | 18.7 | 0.02 | |
| R3 | PL | 1.89 | 5.42 | – | 20.3 | 0.77 | – | – | – |
| 2T | 0.22 | – | 224 ± 13 | 20.5 | 1.41 | 705 ± 29 | 18.7 | 0.02 | |
| R4 | PL | 0.41 | 4.11 | – | 20.7 | 2.16 | – | – | – |
| 2T | 0.42 | – | 308 ± 34 | 20.6 | 1.62 | 943 ± 100 | 19.0 | 0.67 | |
| R5 | PL | 0.34 | 4.78 | – | 19.5 | 0.12 | – | – | – |
| 1T | 1.05 | – | 450 ± 55 | 19.0 | 0.04 | – | – | – | |
| R6 | PL | 0.44 | 5.18 | – | 20.2 | 0.58 | – | – | – |
| 2T | 0.86 | – | 320 ± 43 | 20.0 | 0.30 | 767 ± 144 | 18.0 | 0.01 | |
| Total | PL | 0.64 | 4.28 | – | 20.1 | 6.98 | – | – | – |
| 2T | 0.48 | – | 277 ± 35 | 20.1 | 6.38 | 834 ± 71 | 18.7 | 0.27 | |
Notes. The results from the fit with the single PL temperature distribution, which represents both the hot and warm gas and assumes that the column density follows a PL (dN ∼ TβdT), are shown in the same columns as those corresponding to the warm component of the two temperatures (2T) fits.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.