Astronomy & Astrophysics

All Figures

$\begin{figure} \par\includegraphics[]{aa0885f1.eps} \end{figure}$ Figure 1: VLT R-band image (greyscale; Venemans et al. 2002) with MAMBO 1.2 mm signal-to-noise map (smoothed to 11 $^{\prime \prime }$ ) overlaid as thin/blue contours. Contour levels are -3, -2, 2, 3, 4, 5 and 6 $\sigma$ , with $\sigma$ the local rms noise level (negative contours are dashed). The two large purple contours delineate the regions with $\sigma <0.6$ and 1.2 mJy/beam. The MAMBO beam size is indicated in the lower left corner. The red open crosses indicate spectroscopically confirmed Ly $\alpha$ companions to the radio galaxy TN J1338-1942, and the green open cross labeled R1 an additional FR II radio source.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[width=15cm,clip]{debreuck.fig2.eps} \end{figure}$ Figure 2: Keck/NIRC K-band image (greyscales) with the MAMBO 1.2 mm signal-to-noise map (smoothed to 11 $^{\prime \prime }$ ) overlaid as thick/blue contours and the VLA 1.4 GHz map as thin/red contours. Contour levels for the MAMBO map are 2, 3 and 4 $\sigma$ , with $\sigma$ the local rms noise level. Contour levels for the VLA map are -0.1275, -0.09, -0.063, -0.045, 0.045, 0.063, 0.72, 4.08, 5.775, 62.28 and 130.56 mJy/beam. The MAMBO and VLA beam sizes are indicated in the lower left and lower right corners, respectively. The open cross indicates the position of the optical/radio identification.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[angle=-90,width=7.6cm,clip]{debreuck.fig3a.e... ...includegraphics[angle=-90,width=7.6cm,clip]{debreuck.fig3f.eps}\par \end{figure}$ Figure 3: VLT R-band image (greyscales) with the MAMBO 1.2 mm signal-to-noise map (smoothed to 11 $^{\prime \prime }$ ) overlaid as thick/blue contours and the VLA 1.4 GHz map as thin/red contours. Contour levels for the MAMBO map are -3, -2, 2, 3, 4, 5 and 6 $\sigma$ , with $\sigma$ the local rms noise level. Contour levels for the VLA map are -42, -30, 30, 42, 60 and 85 $\mu$ Jy/beam. The VLA beam size is indicated in the lower right corner. The open cross indicates the position of the optical/radio identification.
Open with DEXTER

In the text

$\begin{figure} \par\includegraphics[angle=-90,width=7.8cm,clip]{debreuck.fig4.eps} \end{figure}$ Figure 4: M 10: MAMBO 1.2 mm signal-to-noise map (thick/blue contours; smoothed to 11 $^{\prime \prime }$ ) and the VLA 1.4 GHz map (thin/red contours). Contour levels for the MAMBO map are 2 and 3 $\sigma$ , with $\sigma$ the local rms noise level. Contour levels for the VLA map are -42, -30, 30, 42, 60, 85, 120 and 170 $\mu$ Jy/beam. The VLA beam size is indicated in the lower right corner. This source falls outside the VLT R-band image.
Open with DEXTER

In the text